Silken Touch Hair Removal Device
Professional IPL Technology
IPL is an optical technology called "strong pulsed light." Pulsed hair-based hair removal is one of the most effective ways to remove excess hair from the body, and the effect is more durable. It differs from other current methods of hair removal as it significantly reduces hair regeneration. Our research shows that after just two exposures, hair is significantly reduced. Good results are generally obtained after four or five exposures. With each complete epilation, the hair density is significantly reduced. This hair remover is equipped with high-performance light bulbs that do not need to be replaced. The bulb has a life of 600,000 flashes and can sustain more than 5 years of exposure, saving you the cost of purchasing expensive spare bulbs.
IPL Photon Hair Removal Principle
This product works by heating the hair under the skin and the roots of the hair. Melanin in the hair and at the roots of the hair absorbs light pulses from the product. The darker the hair, the more light it absorbs. This process can stimulate the hair into a dormant period.
During the irradiation, hair will naturally fall off and be inhibited from regenerating. Hair loss may take one or two weeks. A good hair removal effect cannot be achieved in one step, because only the hair in the growth phase will respond to the light hair removal process. During epilation, the hair at the epilation site is usually at different stages of the hair growth cycle. In order to effectively affect all hair, the irradiation process needs to be repeated every two weeks for the first two months.
This product has an integrated optical filter to ensure that UV rays cannot reach the skin and to ensure that the product is safe for the skin. If the sending filter lens is damaged, please stop using the product immediately and return to the merchant for repair.
Caution
How to use
Preparation Before Hair Removal:
Before using this product, if you have used other methods to remove hair before (such as epilation, depilatory cream, beeswax, etc.), you need to wait until the hair grows and recover before using this product. Before using this product, please make sure that the area to be depilated is shaved. Shaving the hair is necessary to ensure that the light energy is directed to the roots in the most efficient way. Remember not to use a depilatory cream before depilation.
Clean the Skin:
Please keep the skin clean and hairless, completely dry and free of oily substances (such as no cosmetic deodorant, lotion, perfume, suntan, sunscreen, etc.)
Operating Steps:
1- Connect the adapter to a power supply and plug it into the device’s power socket. The ring indicator will flash slowly in red, indicating standby mode.
2- Long press the power button for 2 seconds until the ring indicator lights up red, signaling that the device is in working mode.
3- Place the lamp head against the skin area to be treated. The ring indicator will turn green, and the device will automatically begin the depilation process. No additional buttons need to be pressed.
4- For the skin test, use the device on a small area of skin. Adjust the energy level using the energy adjustment button, cycling through levels 1 to 6. The levels cycle as follows: 1–2–3–4–5–6–5–4–3–2–1. Select the highest level that does not cause discomfort.
5- Long press the power button for 2 seconds to turn off the device, then unplug the adapter.
6- Wait 24 hours after the skin test to check for any discomfort. If any occurs, lower the intensity setting for your next treatment, ensuring to cover the entire area being treated.
7- The cooling fan operates at variable speeds. Its airflow and noise may increase with extended use or higher temperatures, which is normal.